Removal and Replacement Procedures 5-31
DC-DC Converter and Audio Board
To remove the DC-DC converter, complete the following procedures:
1. Prepare the computer for disassembly (Page 5-3).
2. Remove the keyboard (Page 5-14).
3. Remove the RTC battery (Page 5-34).
4. Remove the top cover assembly (Page 5-27).
5. Remove the screws from the converter/audio board shield.
6. Remove the converter/audio board shield.
Figure 5-29.
Removing the DC-DC Converter and Audio Board Shield
To Next Page
Loading...
