5-14 Removal and Replacement Procedures
5.7 Keyboard
To release the keyboard, complete the following procedures.
1. Prepare the computer for disassembly (Page 5-3).
2. Place the computer on the workspace with the front of the unit facing you.
3. Open the display to the vertical position.
4. To release the keyboard, insert the tip of the scribe into each of the keyboard holes,
and pull the free end of the scribe towards you.
5. Slide the keyboard toward you. Be careful not to stress the keyboard cable.
Figure 5-12.
Releasing the Keyboard Latches
To Next Page
Loading...
Need help?
General