Compaq Armada E500 Series User Manual

16-26 Troubleshooting
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 07/01/99 11:12 AM
Part Number: 131511-001 File name: Ch16.doc
Solving Software Application Problems
Most software application or installation problems occur as a
result of one or more of the following:
■ The application was not installed correctly.
■ Memory was not allocated correctly.
■ A conflict exists between applications.
Solving Software Application Problems
Problem Possible Cause Solution
Insufficient memory
to run application
There is not enough
memory for the
application.
Check the
documentation that came
with the software for
memory requirements
and install additional
memory, if needed.
Call Compaq Customer
Support for help with
memory optimization.
Cannot run
application from
current directory
The application has
not been added to the
path statement in the
AUTOEXEC.BAT file.
Using Windows Notepad,
add the application
directory with the full
path name to the
AUTOEXEC.BAT file.

Compaq Armada E500 Series Specifications

General

Processor	Intel Pentium III
Chipset	Intel 440BX
Optical Drive	24x CD-ROM or DVD-ROM
Networking	10/100 Ethernet
Wireless	Optional 802.11b
RAM	Up to 512 MB
Display	14.1-inch TFT, 1024x768 resolution
Graphics	ATI Rage Mobility with 8 MB
Ports	USB, Parallel, Serial, VGA, PS/2, Infrared
Battery	Lithium-Ion
Operating System	Windows 98, Windows 2000
Storage	6 GB - 12 GB Hard Disk Drive
Battery Life	Approximately 2-3 hours