Working with Removable Drives and Device Bays 6-9
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: JAbercrombie Saved date: 07/13/99 1:34 PM
Part Number: 131511-001 File name: Ch06.doc
Using the CD-ROM Drive or DVD-ROM Drive
Inserting a Compact Disc
1. Turn on the computer.
2. Press the eject button on the bezel of the CD-ROM drive to
release the CD loading tray.
3. Slowly pull out the CD loading tray until it is fully extended.
4. Remove the CD from its protective case and place it in the
CD loading tray, label side up. Handle the CD by the edges,
not by the flat surfaces.
5. Push lightly on the bezel of the CD loading tray to close it.
The light on the CD-ROM drive turns on while the computer
reads the CD’s table of contents. The light turns off when the CD-
ROM drive is ready to receive commands.
Removing a Compact Disc
1. Turn on the computer.
2. Press the eject button on the front panel to open the CD
loading tray.
3. Slowly pull out the CD loading tray until it is fully extended.
4. Remove the CD from the tray. Handle the CD by the edges,
not by the flat surfaces.
5. Place the CD in its protective case.
6. Gently push the front panel of the CD loading tray to close it.