7-4 Using an Internal Modem (Available on Select Models)
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: JAbercrombie Saved date: 07/13/99 1:34 PM
Part Number: 131511-001 File name: Ch07.doc
To connect the modem using a country-specific modem adapter:
1. Plug the end of the modem cable with the EMI suppression
circuitry included with the computer into the RJ-11 jack on
the computer
1
.
2. Plug the country-specific modem adapter into the telephone
jack
2
.
3. Plug the modem cable into the country-specific modem
adapter
3
.
Selecting a Country-Specific Modem Configuration
The internal modem is configured to meet operating approval in
the country where you purchased your computer. If the modem is
used in other countries during travel, the country selection setting
for the modem needs to change to meet the telecommunications
regulations for that country.
Modem country configuration is performed through the country
drop-down box on the Dialing Properties screen of the modem
Control Panel. To confirm that the modem has been approved for
use by the telecommunications agency in the desired country,
check the approvals label on the bottom of the computer. Or, for
the most up-to-date information, refer to the Compaq Internet
Web site at www.compaq.com.
To Next Page
Loading...
Need help?
General
