Connecting External Devices 8-1
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Beth Zanca Saved by: J Abercrombie Saved date: 07/01/99 11:01 AM
Pages: 6 Words: 1278 Template: c:\msoffice\templates\portables\ref.dot
Part Number: 131511-001 File name: Ch08.doc
chapter
8
CONNECTING EXTERNAL DEVICES
Connecting an External Enhanced Keyboard
To connect an external enhanced keyboard to the computer,
connect the keyboard cable to the keyboard/mouse connector on
the computer.
Connecting an External Monitor
CAUTION: To prevent damage to the computer, turn off the monitor
before connecting it to the computer or disconnecting it from the
computer. To prevent damage to the computer display, do not place
an external monitor or any other object on top of the computer when
the computer is closed.
To connect an external VGA monitor:
1. Turn off the monitor.
2. Plug the monitor signal cable into the external monitor
connector on the back of the computer.
3. Plug the monitor power cord into a properly grounded
electrical outlet.
4. Turn on the monitor.
5. Ensure that the computer recognizes your monitor type. Click
StartÅSettingsÅControl Panel then double-click Display.
Select the appropriate manufacturer and model, if necessary.
NOTE: If the external monitor does not immediately show a
display, try using the
Fn+F4 hotkeys.
To Next Page
Loading...
Need help?
General
