C-Band Transceiver Revision 1
CSAT-5060 5 to 25 Watt Installation MN/CSAT5060.IOM
A–2
A.2 Single-Thread Configuration
WARNING
The Downconverter RF input connector is wired to supply DC voltage to an
LNA. This voltage is capable of damaging any test equipment connected to
the connector. Do not connect test equipment to this connector without a
coaxial DC block between the connector and the test equipment.
A.2.1 Mounting Kit
The following mounting is providing to pole-mount the unit in a single-thread
configuration. The following tables reflect the contents of the mounting kits.
Table A-1. Universal Pole Mount, AS/0599
Part No. Nomenclature QTY
AS/0414 Kit, Universal Pole Mount 1
AS/0608 Bracket, Mount 25W Single Thread 1
To Next Page
Loading...