LPOD C-/Ku-Band Outdoor Amplifier/Block Up Converter Revision 3
Ethernet Management MN-LPOD
4–22
Alarm Mask
Using the drop-down menus, select each alarm as either Fault, Alarm or Masked for:
• Low Forward RF Power
• Fan Speed
• LNB 22V Power Supply
• External Reference Lock Detected
• LNB Current Detect.
Once the desired configuration settings have been made in this section, the user should then click
[Change Alarm Mask] to save these changes. If it is desired to revert back to the previously
assigned Alarm Mask settings, the user should instead click [Reset].
To update the page with the current viewing and operating configuration, click [Refresh].
To Next Page
Loading...
