Condair Mk5 - Options and Accessories

15
4.3 Options
Thefollowingtablepresentsanoverviewofalloptionswhichareavailableforthesteamhumidier
CondairMk5.
Condair Mk5
Visual Process
Steam capacity in kg/h 5...16 20...40 50...80 5...16 20...40 50...80
Interface RS232/RS485
(Interface PCB RS232/RS485 for data
exchange with a building control system)
RS
number 1 1 1 1 1 1
Remote operating and fault indication
(PCBwithrelaycontactsfortheconnection
ofremotedisplaysfor“Operation”,“Steam”,
“Fault” and “Service”)
RFS
number 1 1 1 1 1 1
Pressure compensation kit
up to 10’000 Pa
(Assembly kit for the installation of the
lling bowl on the equipment cover, for
theoperation of the steam humidier in
installations with duct air pressures up to
10’000 Pa)
OVP
number 1 1 2 1 1 2
Transformer 400-500V/230V
(Transformerforsystemswithoutasepa-
rate control voltage supply)
TRAF
1)
number 1 1 1 1
Connection terminal 400-415 V/3~
(Separate terminals for systems where
direct connection of heating voltage to
main contactor (standard version) is not
permitted by local regulations)
KLK KLG KLK KLG
number 1 1 2 1 1 2
Unit housing stainless steel S-Inox L-Inox S-Inox L-Inox
number 1 1 2 1 1 2
1)
 Whenorderingindicatethetypeofunit