2 | P a g e
Specifications are Subject to Change:
The information contained in this manual is believed to be correct at the time of printing. However,
Conductive Labs LLC reserves the right to change or modify any of the specifications without notice or
obligation to update the hardware that has been purchased.
Warning:
The product may be able to produce sound levels that could cause permanent hearing loss when used in
combination with synthesizers, headphones and/or speakers. It may be able to produce sound levels
that could cause permanent hearing loss. DO NOT operate at high volume levels.
Please Note:
Conductive Labs LLC is not responsible for, and is not covered by, the manufacturer’s warranty. Any fees
incurred due to a lack of knowledge relating to how a function or feature works are therefore the
owner's responsibility. Please read this manual completely before requesting service.
Precautions, not limited to:
1. Read and follow all instructions.
2. Unplug before cleaning and only use only a soft dry cloth. Do not use any cleaners.
3. Do not use the instrument near water or moisture, such as a bathtub, sink, swimming pool or
similar place.
4. Do not expose the instrument to hot sunlight.
5. Do not spill any kind of liquid onto the instrument.
6. Do not place the instrument in an unstable position where it might accidentally fall. Do not
place heavy objects on the instrument.
7. Do not open or insert anything into the instrument that may cause a fire or electrical shock.
8. Always contact Conductive Labs LLC if you have an issue. You will invalidate your warranty if
you open and remove the cover.
9. Do not use the instrument when there is a gas leak nearby.
10. Conductive Labs LLC is not responsible for any damage or data loss caused by improper
operation of the instrument.
11. Do not TAUNT The MRCC!
Not following the above Precautions will void the manufacturer’s warranty.
To Next Page
Loading...
