Conductive Labs MRCC - Side Panel Controls; Power and Firmware Access

20 | P a g e
MRCC SIDE PANEL BUTTONS
Power Switch
Slide up to turn on power.
Firmware (FW) Button
Get MRCC firmware updates from ConductiveLabs.com. Instructions on how to load the firmware is on
the Downloads page. Firmware update software must be run from a computer (Windows, Mac or Linux).
The MRCC must be connected to the computer with a USB cable connected to the PC port.
Summary:
• Download and install the firmware loader (1st time only).
• Download the .HEX.zip (firmware) file.
• Unzip the .HEX.zip (firmware) file.
• In the loader app click File and open the .HEX file.
• In the loader app click on the Auto button (1st time only).
• On The MRCC, use a toothpick or pen to briefly press the recessed FW button (located on the
right-side panel).