Consilium CFD5000 T / CM4.3 User Manual

Service & Maintenance Manual 2Safety Considerations
5100614_CFD5000 T - CM4.3_Service & Maintenance Manual_T_EN_2020_E
5
2 Safety Considerations
2.1 If a Fire or Fault Alarm is Flashing on the
Control Panel
2.1.1 In Case of a Fire Alarm
DANGER!
In case of a fire alarm use the information viewed on the display to verify the alarm
and take the appropriate actions based on local safety procedures.
2.1.2 In Case of a Pre-Alarm
WARNING!
The pre-alarm gives an early alarm to fire conditions (e.g., a smouldering fire).
Use the information viewed on the display to verify the alarm and take the
appropriate actions based on local safety procedures.
2.1.3 In Case of a Fault Alarm
WARNING!
In case of a fault alarm use the information viewed on the display to verify and reset
the fault.
Use the list of fault codes in the manual for more information about cause and
remedy.
If the problem remains take the appropriate actions to restore the functionality of the
fire detection system.
WARNING!
If an internal hardware or software fault has occurred it has to be restored as
promptly as possible in order to secure the functionality of the complete fire
detection system.
The detection of a dangerous fault shall result in either:
•
a specified action to achieve or maintain a safe state; or
•
the repair of the faulty system within the mean repair time (MRT). During this
time the continuing safety shall be ensured by additional measures and
constraints. The safety integrity provided by these measures and constraints
shall be at least equal to the safety integrity provided by the fire detection
system in the absence of any faults.
2.1.4 Further Instructions
•
User instructions for handling the control panel can be found in the User
manual.
•
For comprehensive test procedures refer to the Installation & Commissioning
manual.

Consilium CFD5000 T / CM4.3 Specifications

General

Brand	Consilium
Model	CFD5000 T / CM4.3
Category	Measuring Instruments
Language	English