Consilium CFD5000 T / CM4.3 User Manual

8Appendix A Service & Maintenance Manual
52
5100614_CFD5000 T - CM4.3_Service & Maintenance Manual_T_EN_2020_E
•
“Customer text”
•
“Project name”
•
“Project number”
•
“Installation name”
The remaining information also concerns the configuration file:
Created The time the configuration file was created
Created by The person who created the configuration file
Build Number of times that the configuration file has been
changed
File Name Name of the configuration file
Program The configuration version used to create the file
•
Press 1 to send a list with system details to a connected printer.
•
Press 2 (Program versions) to see the software and hardware versions of the
system modules.
8.1.3 Centrals, Submenu 2
Centrals main screen
The Centrals screen lists the centrals in the system:
CENTRAL x x is the central number where the central is placed
CENTRAL y y is the address of the central
•
Press OK to monitor details about the selected central. (See OK=Details
below.)
•
Press 1 to send a list with centrals to a connected printer.
•
Press 2 to open the module list (similar to Modules main screen described in
section Modules, Submenu 3, page 53).
OK=Details screen
Details about the central:
HW Hardware version
SW Software version
Timestamp Config Time and date of configuration
Modules found / configured Number of found and configured modules
System bus System bus configuration
Communication errors Number of reported communication errors in the last
65535 tries
•
Press OK to go back to list view.

Consilium CFD5000 T / CM4.3 Specifications

General

Brand	Consilium
Model	CFD5000 T / CM4.3
Category	Measuring Instruments
Language	English