Consilium CFD5000 T / CM4.3 - Page 42

6System Update and Programming Service & Maintenance Manual
36
5100614_CFD5000 T - CM4.3_Service & Maintenance Manual_T_EN_2020_E
Install the logger software on your PC and connect to the CS-Loop M module according
to the instructions in separate document 6303591 CCP SIL - CS-Loop M Debug User
Guide.
CAUTION!
Make sure that only compatible hardware/firmware combinations are used. Do not
download firmware to loop units that have a HW version that is incompatible with
the SW version of the firmware.