Controls WIZARD 2 50-C92AXX User Manual

Manuale di Istruzione
Instruction Manual
23/08/2018 Rev.1 EN
114
6.1.2 SERIAL NUMBER option
This screen allows entering the unit serial number that it is normally set during the
manufacturing of the unit and does not need to be changed unless the MEMORY RESET
function has been activated (see chapter 6.1.3).
The serial number will be shown on the display at switch ON.
Once the serial SERIAL NUMBER option is accessed, the system will show
the following screen:
Fig. 6-7
Use the keys to select the digits to change and the
keys to set the serial number. Once finished, press the key confirm
and exit (or the key to exit without changing the present settings); the system
will revert to the SYSTEM MENU.

Controls WIZARD 2 50-C92AXX Specifications

General

Brand	Controls
Model	WIZARD 2 50-C92AXX
Category	Laboratory Equipment
Language	English