Controls WIZARD 2 50-C92AXX User Manual

Manuale di Istruzione
Instruction Manual
23/08/2018 Rev.1 EN
68
4.2.3.4 RESULTS option
Access this screen to set the following TEST RESULT OPTIONS:
• AUTOPRINT: in case it is ENABLED, the system will automatically print the data
at the end of the test, on the internal printer (optional device). In case it is
DISABLED, the printout can take place by pressing the key at the end of
the test;
• AUTOSAVE: in case it is ENABLED, the data are automatically stored at the end of
the test into the memory stick attached to the USB port on the rear panel. In case it is
DISABLED, data transfer will not take place and there are no other methods to
transfer them.
Fig. 4-16
4.2.3.5 LANGUAGE option
It allows selecting the language of the messages on the display.
Fig. 4-17
Once entered, use the keys to select the desired unit, then
key twice to confirm the change and return to the OPTIONS menu.

Controls WIZARD 2 50-C92AXX Specifications

General

Brand	Controls
Model	WIZARD 2 50-C92AXX
Category	Laboratory Equipment
Language	English