Controls WIZARD 2 50-C92AXX User Manual

Manuale di Istruzione
Instruction Manual
23/08/2018 Rev.1 EN
48
3.5 Positioning of the display
Depending on the lighting of the laboratory and the height of the operator, it may be
necessary to adjust the positioning of the display to ensure optimum visibility.
1. Loosen the screw shown in next pictures;
Fig. 3-9
2. Position the control unit as desired;
3. Tighten the screw holding the control unit in the desired position.
Screw to loosen

Controls WIZARD 2 50-C92AXX Specifications

General

Brand	Controls
Model	WIZARD 2 50-C92AXX
Category	Laboratory Equipment
Language	English