Controls WIZARD 2 50-C92AXX - 3.6 Electrical requirements

Manuale di Istruzioni
Instruction Manual
Rev.1 EN 23/08/2018
49
3.6 Electrical requirements
The next table shows the electrical specifications of the equipment:
Item Specifications
Mono phase voltage 110VAC/220VAC/230VAC
+
10
%,
-
10%
Frequency
50
-
60Hz
/
60Hz
Maximum power
750
W
The equipment shall be connected to a proper earth system, the efficiency of which shall
be checked by qualified personnel. Earth shall be via the power cable, as specified above.
WARNING:
The general grounding must comply with the rules in force; a wrong quality of the
grounding could be dangerous for the operator’s safety and cause bad function of the
electrical devices.
The power supply line shall be equipped with a safety device (breaker and ground fault
switch) properly sized with respect to the electrical specifications provided above.