Manuale di Istruzioni
Instruction Manual
Rev.1 EN 23/08/2018
45
3.3 Positioning of the unit and space requirements
WARNING:
Considering the weight of the equipment and the footprint (see chapter 2.8), check the
maximum allowed floor load before installation.
The unit must be placed on a flat and level surface.
The area around the equipment must be kept free from obstacles and from
substances that may cause sliding of the personnel.
It is responsibility of the purchaser to provide an installation place with
adequate lighting.
Parts used to build the machine and electrical/electronic component are fire-proof.
It is anyway the responsibility of the owner of the equipment to make sure that the
installation place is equipped with proper fire extinguishing systems and that the
operators have been instructed on the relevant procedures.
Use a proper mean to bring the unit to the installation place.
Place the unit in its final location, taking into account the free space around the unit: the
equipment requires enough space around, for maintenance and service purposes.
Fig. 3-5
To Next Page
Loading...