Controls WIZARD 2 50-C92AXX User Manual

Manuale di Istruzione
Instruction Manual
23/08/2018 Rev.1 EN
52
3.8 Hydraulic connections
This chapter explains where to connect the hydraulic hose to supply the frame. In case the
device is equipped with the dual output hydraulic block (code C10B/2F to be installed in
the factory) it will be possible to connect a second frame.
WARNING:
To avoid direct contact with the oil of the hydraulic circuit, always wear protective gloves
while performing the checking.
NOTE:
The two frames cannot be driven simultaneously by the control unit.


Controls WIZARD 2 50-C92AXX Specifications

General

Brand	Controls
Model	WIZARD 2 50-C92AXX
Category	Laboratory Equipment
Language	English