Controls WIZARD 2 50-C92AXX - 3.9 Installation of the printer paper

Manuale di Istruzioni
Instruction Manual
Rev.1 EN 23/08/2018
55
3.9 Installation of the printer paper
The printer (optional) is supplied with a roll of thermal paper which should be installed
before starting the unit.
Proceed as follows:
1. Open the paper roll compartment by pressing the OPEN key;
2. Move down the plastic cover to the maximum opening;
3. Place the paper roll making sure that it unrolls in the proper direction as shown;
4. Take out the paper and close the plastic cover;
5. Push on the plastic cover to lock it;
6. Tear off the exceeding paper using the jagged edge.
Fig. 3-14