Manuale di Istruzioni
Instruction Manual
Rev.1 EN 23/08/2018
77
Fig. 4-28
11. When the sample fails, the display will show the test results (maximum load and
resistance) and the system will emit an audible alarm (5 beeps) to inform the
operator; the trend indicator will also show the symbol *****. In case the full scale
of the system was reached before the failure of the sample, the system will only emit
the audible alarm;
Fig. 4-29
12. Turn OFF the pump motor by pressing the relevant switch, then turn lever B slowly
back and lever A down to discharge the oil pressure;
Fig. 4-30
To Next Page
Loading...