Crestron TSW-570 Series - Page 54

50 • TSW-570, TSW-770, and TSW-1070 Product Manual — Doc. 8550C
l Network Configuration
o
HostName:Enterthetouchscreenhostname.
o
PrimaryStaticDNS:Enter theprimary DNSaddress.
o
Secondary Static DNS:Enter thesecondary DNSaddress.
l Ethernet
o
AdapterEnabled:Turnonthetoggletousethetouch screenEthernetadapter,which
allows thetouchscreentomakeanEthernetconnection.
o
DHCPEnabled:TurnonthetoggletouseDHCPfor theEthernetconnection.
NOTE:If DHCPis enabled,IPdoes notfunctionuntilareplyhas beenreceivedfrom
theserver.Thetouchscreenbroadcasts requests for anIPaddress periodically.
o
Domain:Enter thefullyqualifieddomain nameon thenetwork.
o
IP Address:Enter thetouch screenIP address onthenetwork.
o
SubnetMask:Enter thetouch screensubnetmaskaddress onthenetwork.
o
DefaultGateway:Enter thegatewayrouter address onthenetwork.
l WI-FI
o
AdapterEnabled:Turnonthetoggletousethetouch screenWi-Fiadapter,which
allows thetouchscreentomakeaWi-Finetworkconnection.
o
DHCPEnabled:TurnonthetoggletouseDHCPfor theWi-Ficonnection.
o
Domain:Enter thefullyqualifiedWi-Fidomainnameonthenetwork.
o
SubnetMask:Enter theWi-Fisubnetmaskaddress onthenetwork.
o
DefaultGateway:Enter theWi-Figatewayrouter address onthenetwork.
l WI-FIAccess Points
o
ScanWi-FiAccess Points:Clickthis buttontoscanthenetworkfor anyopen Wi-Fi
access points.Alldiscoveredaccess points aredisplayedintheSelectDiscovered
Access Points menu.
o
SelectDiscoveredAccess Points:Selectanaccess pointfrom this menu after
scanningfor Wi-Fiaccess points.Enter textinthesearchfieldtosearchfor aspecific
Wi-Fiaccess pointname
o
AddAccess Points:Clickthis buttontoaddtheselectedaccess pointentryfrom the
SelectDiscoveredAccess Pointsfieldtothetablebelow.
EachaddedWi-Fiaccess point isdisplayedinatablethatcontains thefollowinginformation.
l SSID:Enter or modifytheSSID(name)of theWi-Fiaccess point.
l Encryption Key:Selectthesecurity/encryptiontypeusedbytheWi-Fiaccess point.
l Password:EnterthepasswordusedtoconnecttotheWi-Fiaccess point.
l ActiveAccess Point:Indicates whether aconnectionto theWi-Fiaccess pointisactive
ClickAddtoaddanewentrytotheWi-Fiaccess point table.Afterselectingonemoreentries inthe
Wi-Fiaccess pointtable,clickRemovetodeletetheselectedentries.