|
59
OPERATING INSTRUCTIONS
7. After removing, place the bike carefully
on its left hand side.
Danger of material damage!
With no rear wheel, the frame and/or the
gear mechanism can become damaged.
•
After removing the rear wheel lie the bike on
its left side or use a suitable assembly stand.
To t your road wheels.
Fit the rear wheel rst.
1. a) Inserting the rear wheel
•
Lift up the rear of the bike,
placing the rear wheel under it so that the
chain is over the smallest sprocket.
•
Disk brakes: insert the road wheel so that
the brake disk can be easily pushed between
the brake pads.
•
Carefully lower the rear of the bike until the
axle is at the dropout stop on the right and
left sides.
To Next Page
Loading...
