CVC TECHNOLOGIES, INC. CVC 310 OPERATION MANUAL
It is not allowed to alter the equipment’s original appearance by alterations,
maintenance or by any other means carried out on behalf of the
customer/owner or by a third party.
It is not allowed to place or fit any additional equipment inside any cabinet or on
any part of the equipment, which are not delivered, approved or mounted by the
manufacturer or sales distributor.
It is the customer/owner’s sole responsibility that all personnel likely to be
engaged in the operating, cleaning or maintenance of the equipment covered by
this instruction manual have read and understand this instruction manual.
It is essential that all personnel likely to be engaged in the operating, cleaning
or maintenance of the equipment covered by this instruction manual are fully
experienced in the type of work that they are requested to perform.
It is the customer/owner’s sole responsibility that all personnel likely to be
engaged in the operating, cleaning or maintenance of the equipment covered by
this instruction manual are aware of the potential hazards which may result if
the equipment is not used in accordance with the instructions provided.
Before switching ON the main power switch, always ensure that all original
cover doors, protective hoods and guards are fitted in their correct positions
and unimpaired.
Do not stand, sit or lean on any part of the equipment covered by this instruction
manual or on any other equipment serving or being served by the equipment,
either during operation, cleaning, inspection or maintenance.
Never attempt to lift any part of the equipment without first knowing its weight.
Always use appropriate, safety tested lifting equipment when necessary. Always
seek assistance when in doubt.
Always switch OFF the main power switch before connecting or disconnecting
an electrical connection.
3 - 5
To Next Page
Loading...
