PAGE 50 USER GUIDE DNC 60 PS
Sequence N 3: Face 2 and Leg 1
Sequence N 4: Face 3 and Leg 2
Call the bending order page by pressing the
key twice.
Fill in the FACE and LEG fields as below.
You will remark that the p/d fields are already programmed since we
have already made a calculation before.
N FACE LEG CR p/d
1 4 0 __ 1/ 1
2 1 0 __ 1/ 1
3 2 1 __ 1/ 1
4 3 2 __ 1/ 1
Press the key.
The system calculates the entire machine program (axes, functions, etc.) and
displays the sheet metal manipulations to be made before each sequence.
N FACE LEG CR p/d
1 4 0 __ 1/ 1
2 1 0 __ 1/ 1
3 2 1 __ 1/ 1 RETURN
4 3 2 __ 1/ 1
To Next Page
Loading...
