4.2 Transport
C
heck the delivery
On receipt of the crate check to see if there is any apparent damage to the crate and
the equipment. When unpacking BPG columns check that all equipment is enclosed in
the transport crate according to the packing list.
If any damage is observed do not continue with the installation of the column, record
this on the receiving documents. Contact your Cytiva representative for advice and
further instruction.
Transport in crate
WARNING
M
ove transport crates. Make sure that the lifting equipment has
the capacity to safely lift the crate weight. Make sure that the crate
is properly balanced so that it will not accidentally tip when moved.
Use proper lifting device with a minimum capacity to match the empty weight of the
c
olumn plus the crate. If maneuvering is performed with a crane or hoist, keep lifting
heights to the minimum necessary to make sure that there is sufficient clearance
space to allow passage of the column when lifted from the floor. Refer to the product
documentation for information about column weight and dimensions for each column.
Moving the column
WARNING
M
ake sure that the wheel support is fully engaged into the stand
before start moving.
Be careful not to unscrew the wheels too far before moving. If they are unscrewed
t
otally the column may fall and cause injury or damage. The wheels should be fully
engaged into stand before moving the column.
4 Installation
4
.2 Transport
BPG Columns Operating Instructions 29193223 AB 35
To Next Page
Loading...
