Use the level adjusters
B
efore operation the column must be level. Use a spirit level to check if the column is
level. Measure in two positions perpendicular to one another and repeat the measure-
ments at several points around the exterior of the column.
If column is not level screw all wheels fully into the stand and then level on the correct
wheel to avoid adjusting any wheel to far out.
• If the column must be raised, turn the column leg level adjustor clockwise.
• If the column must be lowered, turn the column leg level adjustor counter-clock-
wise.
Check if the column is level after adjusting each leg. Adjust the column legs in turn until
the column is level.
4 Installation
4
.4 How to level the column
BPG Columns Operating Instructions 29193223 AB 39
To Next Page
Loading...
