xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
92
Figure 6- 61. Time Zone and DST Settings window
The following parameters can be set:
Parameter Description
Time Zone and DST Settings
Daylight Saving
Time State
Use this pull-down menu set the DST Settings as disabled, repeating, or annual.
Daylight Saving
Time Offset in
Minutes
Use this pull-down menu to specify the amount of time that will constitute your local DST offset
30, 60, 90, or 120 minutes.
Time Zone Offset
from GMT in +/-
HH:MM
Use these pull-down menus to specify your local time zone's offset from Greenwich Mean
Time (GMT.)
DST Repeating Settings
Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning
and ending date be specified using a formula. For example, specify to begin DST on Saturday during the second week
of April and end DST on Sunday during the last week of October.
From: Which Day
Enter the week of the month that DST will start.
From: Day of Week
Enter the day of the week that DST will start on.
From: Month
Enter the month DST will start on.
From: time in
Enter the time of day that DST will start on.
To Next Page
Loading...
Need help?
General