xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
164
PAE System Control
Existing 802.1x port settings are displayed and can be configured using the windows below.
Port Capability
Click, Security Management > Port Access Entity > PAE System Control > Port Capability to view the following window:
Figure 7- 14. 802.1x Capability Settings window
To set up the Switch's 802.1x port-based authentication, select which ports are to be configured in the From and To fields. Next,
enable the ports by selecting Authenticator from the drop-down menu under Capability. Click Apply to let your change take effect.
Configure the following 802.1x capability settings:
Parameter Description
To Next Page
Loading...
