xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
227
Safeguard Engine Status
The following window displays parameters configured for and about the Safeguard Engine Status currently set on the Switch.
To view this window click, Monitoring > Safeguard Engine Status.
Figure 8- 25. Safeguard Engine Status and CPU Utilization Information window
The information is described as follows:
Parameter Description
State
Displays the current running state of the Safeguard Engine, whether enabled or disabled.
Current Status
Displays the current running status of the Safeguard Engine, whether in exhausted mode or
normal mode.
Interval
Displays the time interval between the checking of the rising and falling threshold of packets
entering the Switch. The default setting is 5 seconds.
Rising Threshold
Displays the set percentage of the rising threshold of packets determinant of the Safeguard
Engine.
Falling Threshold
Displays the set percentage of the falling threshold of packets determinant of the Safeguard
Engine.
Trap/log
Displays the status of the sending of messages to the switch’s log or SNMP trap. Enabled
will denote the switch will send trap messages in the event of a Safeguard Engine
engagement.
To Next Page
Loading...
Need help?
General