xStack
®
DES-3500 Series Layer 2 Stackable Fast Ethernet Managed Switch User Manual
155
Add a new user by typing in a User Name, and New Password and retype the same password in the Confirm New Password.
Choose the level of privilege (Admin, Operator, or User) from the Access Right drop-down menu and click Apply. To return to
the User Account Table click the hyperlinked Show All User Account Entries
.
NOTICE: In case of lost passwords or password corruption, please refer to the
D-Link website and the White Paper entitled “Password Recovery Procedure”,
which will guide you through the steps necessary to resolve this issue.
Figure 7- 4. User Accounts Modify Table window - Modify
Modify or delete an existing user account in the User Account Modify Table. To delete the user account, click on the Delete
button. To change the password, type in the New Password and retype it in the Confirm New Password entry field. The level of
privilege (Admin, Operator, or User) can be viewed in the Access Right field. To return to the User Account Table click the
hyperlinked Show All User Account Entries
.
To Next Page
Loading...
Need help?
General