DXS-3326GSR Gigabit Layer 3 Switch
Parameter Description
Interface Name
An IP interface name that has been enabled for VRRP. This entry must have been
previously set in the IP Interface Table window.
Authentication type
Displays the type of authentication used to compare VRRP packets received by a
virtual router. Possible authentication types include
•
•
•
No authentication - No authentication has been selected to compare VRRP
packets received by a virtual router.
Simple Text Password - A Simple password has been selected to compare
VRRP packets received by a virtual router, for authentication.
IP Authentication Header - An MD5 message digest algorithm has been
selected to compare VRRP packets received by a virtual router, for
authentication.
VRID
Displays the virtual router ID set by the user. This will uniquely identify the VRRP
Interface on the network.
Display
Click the
button to display the settings for this particular VRRP entry.
Delete
Click the
to delete this VRRP entry.
Click the Add button to display the following window to configure a VRRP interface.
Figure 7- 46. VRRP Interface Settings – Add window
Or, the user may click the hyperlinked Interface Name to view the same window:
The following parameters may be set to configure an existing or new VRRP interface.
Parameter Description
Interface Name
Enter the name of a previously configured IP interface to create a VRRP entry for.
This IP interface must be assigned to a VLAN on the Switch
162
To Next Page
Loading...
