DXS-3326GSR Gigabit Layer 3 Switch
IP Address
Displays the IP address for the IP interface named above.
Hello Interval (1-18724
sec) <30>
This field allows an entry of between 1 and 18724 seconds and determines the
interval between sending Hello packets to other routers on the network. The default is
30 seconds.
Join/Prune Interval (1-
18724 sec) <60 >
This field allows an entry of between 1 and 18724 seconds. This interval also
determines the time interval the router uses to automatically remove prune
information from a branch of a multicast delivery tree and begin to flood multicast
messages to all branches of that delivery tree. These two actions are equivalent. The
default is 60 seconds.
State <Disabled> This field can be toggled between Enabled and Disabled using the pull-down menu,
and is used to enable or disable PIM-DM for the IP interface. The default is Disabled.
Click Apply to implement changes made. Click Show All PIM-DM Interface Entries to return to the first PIM-DM
Interface Settings window.
170
To Next Page
Loading...
