DXS-3326GSR Gigabit Layer 3 Switch
Figure 3- 6. Stacking LEDs at the front of the DXS-3326GSR
The Switch can be stacked in a star or ring topology, as previously mentioned. For a star architecture, only one of the two
Gigabit stacking ports will be in use. This port will be connected to the master switch of the switch stack and will act as a
slave switch of the stack. The administrator may use either of the two available stacking ports to achieve this arcitecture.
See the following diagram for an example of stacking in a star architecture.
Figure 3- 7. Stacking in a Star Architecture
17
To Next Page
Loading...
