D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
236
To view this window, click Network Application > SNTP > SNTP Settings as shown below:
Figure 9-12 SNTP Settings window
The fields that can be configured are described below:
Parameter Description
SNTP State
Use this radio button to enable or disable SNTP.
Current Time
Displays the Current Time.
Time Source
Displays the time source for the system.
SNTP First Server
The IP address of the primary server from which the SNTP information will be taken.
SNTP Second
Server
The IP address of the secondary server from which the SNTP information will be taken.
SNTP Poll Interval In
Seconds (30-99999)
The interval, in seconds, between requests for updated SNTP information.
Click the Apply button to accept the changes made.
Time Zone Settings
Users can configure time zones and Daylight Savings Time settings for SNTP.
To view this window, click Network Application > SNTP > Time Zone Settings as shown below: