D-Link xStack DES-3200 Series Reference Guide

xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
273
Download Firmware From HTTP
This window is used to download firmware from a computer to the Switch and updates the switch.
Figure 12-6 Download Firmware – HTTP window
The fields that can be configured are described below:
Parameter Description
Destination File
Enter the file name that will be stored in the flash of the Switch, e.g. C:/runtime.had.
Source File Enter the location of the Source File, e.g. runtime.had, or click the Browse button to
navigate to the firmware file for the download.
Click Download to initiate the download.
Upload Firmware
The following window is used to upload firmware from the Switch.
Upload Firmware To TFTP
This window is used to upload firmware from the Switch to a TFTP Server.
Figure 12-7 Upload Firmware – TFTP window
The fields that can be configured are described below:
Parameter Description
TFTP Server IP
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
Destination File
Enter the file name that will be stored in the TFTP server, e.g. runtime.had.
Source File
Enter the location of the Source File, e.g. C:/runtime.had.
Click Upload to initiate the upload.
Upload Firmware To FTP
This window is used to upload firmware from the Switch to a FTP Server.

D-Link xStack DES-3200 Series Specifications

General

Brand	D-Link
Model	xStack DES-3200 Series
Category	Network Router
Language	English