D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Managed Fast Ethernet Switch
248
Figure 10-12 CFM Packet Counter Window
The fields that can be configured are described below:
Parameter Description
Port List
Enter a list of ports to be displayed. Tick the All Ports check box to display all ports.
Type Transmit – Selecting this option will display all the CFM packets transmitted.
Receive – Selecting this option will display all the CFM packets received.
CCM – Selecting this option will display all the CCM packets transmitted and received.
Click the Find button to locate a specific entry based on the information entered.
Click the Clear button to clear all the information entered in the fields.
CFM Fault Table
This window is used to show the MEPs that have faults.
To view this window, click OAM > CFM > CFM Fault Table, as shown below:
Figure 10-13 CFM Fault Table Window
The fields that can be configured are described below:
Parameter Description
MD Name
Select and enter the Maintenance Domain name used.