D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
13
6
show 802.1p default_priority
Used to displ
ay the currently configured 802.1p priority value that
will be assigned to an incoming, untagged packet before being
forwarded to its destination.
Purpose
sho
w 802.1p default_priority {<portlist>}
Syntax
This
command is used to display the currently configured 802.1p
priority value that will be assigned to an incoming, untagged packet
before being forwarded to its destination.
Description
Parameters
<portlist>  Specifies a port or range of ports to be displayed.
Non
e.
Restrictions
Example usage:
To display the current 802.1p default priority configuration on the Switch:
DES-3200-28:4#show 802.1p default_priority
Command: show 802.1p default_priority
Port Priority Effective Priority
---- ----------- ------------------
1 0 0
2 0 0
3 0 0
4 0 0
5 0 0
6 0 0
7 0 0
8 0 0
9 0 0
10 0 0
11 0 0
12 0 0
13 0 0
14 0 0
15 0 0
16 0 0
17 0 0
18 0 0
19 0 0
20 0 0
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)