D-Link xStack DES-3200 Series - Page 155

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
15
0
enable pvid auto_assign
Used to ena
ble auto-assignment of PVID.
Purpose
enabl
e pvid auto_assign
Syntax
This
command is used to enable auto-assignment of PVID.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable auto-assignment of PVID:
DES-3200-28:4#enable pvid auto_assign
Command: enable pvid auto_assign
Success.
DES-3200-28:4#
disable pvid auto_assign
Used to disab
le the auto-assignment of PVID.
Purpose
disa
ble pvid auto_assign
Syntax
This
command is used to disable the auto-assignment of PVID.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the auto-assignment of PVID:
DES-3200-28:4#disable pvid auto_assign
Command: disable pvid auto_assign
Success.
DES-3200-28:4#
show pvid auto_assign
Used to displ
ay the PVID auto-assignment state.
Purpose
sho
w pvid auto_assign
Syntax
This
command is used to display the PVID auto-assignment state.
Description
Non
e.
Parameters
Non
e.
Restrictions