D-Link xStack DES-3200 Series - Page 205

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
20
0
Example usage:
To configure the RADIUS settings:
DES-3200-28:4#config radius 1 10.48.74.121 key dlink default
Command: config radius 1 10.48.74.121 key dlink default
Success.
DES-3200-28:4#
config radius parameter
Used to co
nfigure parameters for RADIUS servers.
Purpose
config radiu
s parameter {timeout <int 1-255> | retransmit <int 1-
255>} (1)
Syntax
This
command is used to configure parameters for RADIUS servers.
Description
Parameters
timeout <int 1-255>  The time in second for waiting server reply.
The default value is 5 seconds.
retransmit <int 1-255>  The count for re-transmit. The default value
is 2.
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To configure the timeout option for RADIUS servers:
DES-3200-28:4# config radius parameter timeout 3
Command: config radius parameter timeout 3
Success.
DES-3200-28:4#
show radius
Used to displ
ay the current RADIUS configurations on the Switch.
Purpose
s
how radius
Syntax
This
command is used to display the current RADIUS configurations
on the Switch.
Description
Non
e.
Parameters
Non
e.
Restrictions