D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
19
enable clipaging
Used to pau
se the scrolling of the console screen when a command
displays more than one page.
Purpose
enabl
e clipaging
Syntax
This
command is used when issuing a command which causes the
console screen to rapidly scroll through several pages. This
command will cause the console to pause at the end of each page.
The default setting is enabled.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To enable pausing of the screen display when the show command output reaches the end of the page:
DES-3200-28:4#enable clipaging
Command: enable clipaging
Success.
DES-3200-28:4#
disable clipaging
Used to disab
le the pausing of the console screen scrolling at the
end of each page when a command displays more than one screen
of information.
Purpose
disa
ble clipaging
Syntax
This
command is used to disable the pausing of the console screen
at the end of each page when a command would display more than
one screen of information.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable pausing of the screen display when show command output reaches the end of the page:
DES-3200-28:4#disable clipaging
Command: disable clipaging
Success.
DES-3200-28:4#