D-Link xStack DES-3200 Series - SSL Commands

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
28
1
config ssh server
Switch to attempt another login.
rekey [10min | 30min | 60min | never]  Sets the time period that the
Switch will change the security shell encryptions.
Only Administrator-level users
can issue this command.
Restrictions
Usage example:
To configure the SSH server:
DES-3200-28:4# config ssh server maxsession 2 contimeout 300 authfail 2
Command: config ssh server maxsession 2 contimeout 300 authfail 2
Success.
DES-3200-28:4#
show ssh server
Used to displ
ay the SSH server setting.
Purpose
sho
w ssh server
Syntax
This
command is used to display the current SSH server setting.
Description
Non
e.
Parameters
Non
e.
Restrictions
Usage example:
To display the SSH server:
DES-3200-28:4# show ssh server
Command: show ssh server
SSH Server Status : Disabled
SSH Max Session : 8
Connection Timeout : 120 (sec)
Authenticate Failed Attempts : 2
Rekey Timeout : never
Listened Port Number : 22
DES-3200-28:4#
config ssh user
Used to co
nfigure the SSH user.
Purpose
config
ssh user <username 15> authmode [hostbased [hostname
<domain_name 32>] [hostname_IP <domain_name 32> <ipaddr>] |
password | publickey]
Syntax
This
command is used to configure the SSH user authentication
method.
Description
Parameters
<username 15>  Enter a username of no more than 15 characters to