D-Link xStack DES-3200 Series - Page 395

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
39
0
show address_binding dhcp_snoop
To sho
w address binding entries created by DHCP packet.
Purpose
sho
w address_binding dhcp_snoop {[max_entry {ports <portlist>} |
binding_entry {port <port>}]}
Syntax
This
command is used to show address binding DHCP snooping
information.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display address binding DHCP snooping:
DES-3200-28:4#show address_binding dhcp_snoop
Command: show address_binding dhcp_snoop
DHCP_Snoop : Enabled
DES-3200-28:4#
To display an address binding DHCP snooping entry:
DES-3200-28:4#show address_binding dhcp_snoop binding_entry
Command: show address_binding dhcp_snoop binding_entry
IP Address MAC Address Lease Time (secs) Port Status
----------- ----------------- ----------------- ---- ------
10.1.1.1 00-00-00-00-00-11 1188 1 Active
Total Entries : 1
DES-3200-28:4#