xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
39
1
To display address binding DHCP snooping maximum entry:
DES-3200-28:4#show address_binding dhcp_snoop max_entry
Command: show address_binding dhcp_snoop max_entry
Port Max entry
---- ---------
1 5
2 5
3 5
4 5
5 5
6 5
7 5
8 5
9 5
10 5
11 5
12 5
13 5
14 5
15 5
16 5
17 5
18 5
19 5
20 5
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Page A All
enable address_binding dhcp_snoop
Used to ena
ble the address binding DHCP snooping.
Purpose
enabl
e address_binding dhcp_snoop
Syntax
Th
is command is used to enable the function to allow entries to be created by the
DHCP packet. By default, DHCP snooping is disabled. If a user enables DHCP
snooping, all address binding disabled ports will function as server ports (the
Switch will learn IP addresses through server ports (by DHCP OFFER and
DHCP ACK packets)).
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
To Next Page
Loading...
