D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
42
6
config mac_based_access_control max_users
Used to co
nfigure the maximum number of authorized clients.
Purpose
config ma
c_based_access_control max_users [no_limit | <value 1-
128>]
Syntax
This
command is used to specify the maximum user limit per counter.
Description
no_limit – Sp
ecify to not limit the system maximum user number.
Parameters
<value 1-128> – Specify to set the maximum number of authorized
clients on the whole device.
Only Administrator-level users
can issue this command.
Restrictions
Example usage
To configure the MAC-based access control maximum number of users:
DES-3200-28:4#config mac_based_access_control max_users 128
Command: config mac_based_access_control max_users 128
Success.
DES-3200-28:4#