D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
42
7
config mac_based_access_control authorization attributes
Used to ena
ble or disable local or RADIUS authorization to accept an authorized configuration.
Purpose
config ma
c_based_access_control authorization attributes { radius [ enable | disable ] | local
[ enable | disable ] } (1)
Syntax
Used to ena
ble or disable an authorized configuration to be accepted.
Description
When authorization is enabled for MAC-based access controls with RADIUS authentication, the
authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the
RADUIS server will be accepted if the global authorization status is enabled.
When authorization is enabled for MAC-based access controls with local authentication, the
authorized attributes assigned by the local database will be accepted.
radiu
s - If specified to enable, the authorized attributes (for example VLAN, 802.1p default
priority, and ACL) assigned by the RADUIS server will be accepted when the global
authorization status is enabled with the enable authorization attributes command.
Parameters
The default state is enabled.
local - If specified to enable, the authorized attributes assigned by the local database will be
accepted if the global authorization status is enabled with the enable authorization attributes
command.
The default state is enabled.
Only Administrator-level users
can issue this command.
Restrictions
Example usage
The following example will disable the configuration authorized from the local database:
DES-3200-28F:4# config mac
_
based
_
access
_
control authorization attributes local
disable
Command: config mac_based_access_control authorization attributes local disable
Success.
DES-3200-28F:4#