D-Link xStack DES-3200 Series

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
42
8
enable authorization attributes
The ena
ble authorization command globally enables the authorization for attributes function.
Purpose
enabl
e authorization attributes
Syntax
Used to ena
ble authorization attributes. When enabled, authorized attributes (for example
VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server or local database.
Which attributes will be accepted depends on the individual module’s setting.
Description
Authorization for attributes is disabled by default.
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
This example sets authorization global state to enabled:
DES-3200-28F:4# enable authorization attributes
Command: enable authorization attributes
Success.
DES-3200-28F:4#
disable authorization attributes
The disable authorization attributes command globally disables the
authorization attributes function.
Purpose
disa
ble authorization attributes
Syntax
Used to disab
le authorization attributes.
Description
When the authorization for attributes is disabled, the authorized attributes (for
example VLAN, 802.1p default priority, and ACL) assigned by the RADUIS server or
local database will be ignored even if the individual module’s setting is enabled.
Authorization for attributes is disabled by default.
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
This example sets authorization global state disabled:
DES-3200-28F:4# disable authorization attributes
Command: disable authorization attributes
Success.
DES-3200-28F:4#