D-Link xStack DES-3200 Series User Manual

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
71
show firmware information
Used to displ
ay the firmware section information.
Purpose
s
how firmware information
Syntax
This
command is used to display the firmware section information.
Description
Non
e.
Parameters
Non
e
Restrictions
Example usage:
To display the current firmware information on the Switch:
DES-3200-28:4#show firmware information
Command: show firmware information
ID Version Size(B) Update Time From User
-- --------- ------- ------------------- -------------------- ----------
*1 1.10.B014 3507464 0000/00/00 05:22:22 Serial Port(PROM) Unknown
2 (Empty)
'*' : Boot up firmware
(SSH) : Firmware update through SSH
(WEB) : Firmware update through WEB
(SIM) : Firmware update through Single IP Management
(SNMP) : Firmware update through SNMP
(TELNET) : Firmware update through TELNET
(CONSOLE) : Firmware update through CONSOLE
DES-3200-28:4#

D-Link xStack DES-3200 Series Specifications

General

Managed	Yes
Layer	Layer 2
MAC Address Table Size	8K
Quality of Service (QoS)	802.1p
Security Features	ACL, 802.1X, Port Security
Jumbo Frame Support	Up to 9KB
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
Standards Compliance	IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.1w, IEEE 802.1s, IEEE 802.1Q, IEEE 802.1p
Forwarding Rate	13.1 Mpps (48-port)