D-Link xStack DES-3200 Series - Page 94

xStack® DES-3200 Series Layer 2 Ethernet Managed Switch CLI Reference Manual
89
disable syslog
Used to disab
le the system log to be sent to a remote host.
Purpose
disa
ble syslog
Syntax
This
command is used to disable the system log to be sent to a
remote host.
Description
Non
e.
Parameters
Only Administrator-level users
can issue this command.
Restrictions
Example usage:
To disable the syslog function on the Switch:
DES-3200-28:4#disable syslog
Command: disable syslog
Success.
DES-3200-28:4#
show syslog
Used to displ
ay the syslog protocol status as enabled or disabled.
Purpose
sho
w syslog
Syntax
This
command is used to display the syslog status as enabled or
disabled.
Description
Non
e.
Parameters
Non
e.
Restrictions
Example usage:
To display the current status of the syslog function:
DES-3200-28:4#show syslog
Command: show syslog
Syslog Global State : Disabled
DES-3200-28:4#